MAKO58

MAKO58 4
MAKO58 1
MAKO58 2
MAKO58 3
MAKO58 5
MAKO58 6
MAKO58 7
previous arrow
next arrow

MAKO58

Features

  • front peak for the anchor with the side opening door;
  • back peak with the mooring accessories;
  • front sunbathing bed convertible into a double bed with extensions as an optional that includes dunnages and pillows, the middle dunnage with a stainless steel leg can be used as a table;
  • 145 x 130 back sunbathing bed (with back rest in the horizontal position);
  • wide back peak;
  • wide front peak;
  • two-seater console with mechanical wheelhouse, stainless steel rudder, 2 internal compartments with door and one peak under the front seat.
  • foldaway stainless steel ascent ramp and VTR bridge;
  • 4 stainless steel bollards;
  • perimetric double millpond;
  • anchor-winch nose;
  • 5 stainless steel (4 eyebolts for hangers);
  • repairs kit;
  • inflating device;
  • a pair of paddles;
  • bilge pump

Technical Data

  • Static self emptying
  • Length mt 5.80
  • Width mt 2,54
  • Internal walking length mt 4,70
  • Internal walking width mt 1,90
  • Intertubular width mt 1,40
  • Tubular diameter cm 56
  • Watertight compartments n. 5
  • Seating capacity n. 10
  • Net dinghy weight kg 480(with standard equipment, without liquids and motor) ± 10% variable datum
  • Maximum power applicable KW 85 / CV 115
  • Minimum power applicable (minimum performance)HP 40
  • Power recommended (average performance) HP 90
  • Engine shaft length L
  • weight motors kg 320
  • CE certification with “C ” design category (A+a form)

Optional Equipment

  • Reticular polyethylene fuel tank of about 130 lt.
  • Reticular polyethylene fuel tank installation in accordance with EC standards
  • Overturning stainless steel roll-bar
  • Roll-bar installation with running lights, anchorage lights, horn and wiring
  • Beacon ready installed on roll-bar/console
  • Electric panel
  • Left stern deck with folding ladder
  • Right stern deck
  • Auxiliary engine support
  • Prow sunbed extension with limber board and table legs
  • “Stand up” cushion
  • Total night cover
  • Partial night cover
  • Console cover
  • Shower Complete with surge tank, tank in prow,outdoor embarkation and installation
  • Complete dingy heuling belt kit for launch/accommodation
  • Anchor windlass installed with motor, cable, chain and double controls (in console and anchor housing)
  • Wake board kit
  • Flexi-teak for cockpit
  • Felxi teak for the bridges
  • Flexi-teak installation
  • Nautical camping tent
  • Rear telescopic sun-cover for roll-bar
  • Side canopy(1) for telescopic sun-cover

ZAR97 Welldeck

ZAR97 Welldeck 1
ZAR97 Welldeck 2
ZAR97 Welldeck 3
ZAR97 Welldeck 4
ZAR97 Welldeck 6
previous arrow
next arrow

ZAR97 Welldeck

Features (Concept / Limited)

  • Stern deck with folding ladder (Limited version only)
  • Stern deck with gangway and electrical gangway fitting(Limited version only)
  • Full set of stern cockpit cushions (Limited version only)
  • N° 1 external cockpit wash basin with chopping board
  • Stern sunbathing area
  • Bow sunbathing area
  • Full set of cabin cushions (n° 1 double bed in the bow + n° 1 in the stern)
  • Internal cabin maple wood panelling
  • N° 8 cushions of different colours for the bed in the bow(Limited version only)
  • N° 5 cushions of different colours for the bed in the stern(Limited version only)
  • N° 2 cushions with Sky Deck stitching (Limited version only)
  • Hydraulic stearing gear
  • Stainless steel framed windscreen
  • Sliding plexiglass cabin entrance door
  • N° 3 stainless steel portholes with fly screen
  • Sliding sun light window with flyscreen and shade curtain
  • Stainless steel wash basin with mixer tap for the cabin bathroom
  • Shower slide bar
  • Electric sea wc with macerator (Limited version only)
  • Automatic open/close valve for sea wc (Limited version only)
  • Black water tanks with 2° electric macerator (Limited version only)
  • N° 3 cabin mirrors
  • N° 2 mirrors in the bathroom
  • N° 1 full-size mirror on bathroom door
  • N° 9 wooden cabin closets
  • N° 1 wardrobe with hangers
  • N° 1 piece of furniture with 2 drawers, 2 closets and top with stainless steel no-drop edge
  • N° 3 bedside tables
  • N° 4 bed side lamps
  • 6 kg. stainless steel anchor
  • Anchor winch nose + stainless steel bow
  • N° 2 fuel tanks 300 lt each (tot. 600 lt.) (Limited version)
  • N° 1 fuel tank 300 lt (Concept version)
  • N° 2 water tanks (80 + 67 lt.) (Limited version)
  • N° 1 water tank (80 lt.) (Concept version)
  • Autoclave pump system for internal and external shower, bathroom basin and external basin
  • Wastewater collection and discharge tank
  • Electric panel in the deck
  • Fuse panel in the cabin
  • Shore battery charger (Limited version only)
  • Isolator switch for n° 3 batteries with charge and balance divider (Limited version only)
  • Earth collecting anode on the stern mirror (Limited version only)
  • Dinette table in the bow
  • Table inside the cabin
  • N° 6 cold spotlights for cabin
  • N° 3 cold spotlights for bathroom
  • Upright 50 lt.fridge with compressor
  • Two burner cooker (excluding connection and gas cylinder)
  • Anchor windlass controller from console and remote control handset (Limited version only)
  • Shutters for cabin and bathroom portholes (Limited version only)
  • Waterproof shower curtain (Limited version only)
  • Fabric curtain between stern cabin and bow cabin (Limited version only)
  • Bilge pump

Technical Data

  • Static self emptying
  • Length m 9.70
  • Width m 3.25
  • Internal walking length m 9.70
  • Internal walking width m 2.30
  • Intertubular width m 2.05
  • Tubular diameter cm 60
  • Watertight compartments n. 6
  • Seating capacity n 14/16
  • Net dinghy weight kg 2,800
  • (with standard equipment, without
  • liquids and motor) ± 10% variable datum
  • Maximum power applicable kW 442- HP 600
  • Minimum power applicable (minimum performance) HP 350
  • Power recommended (average performance) HP 450/500
  • Engine shaft lenght
  • 1 engine XXL
  • 2 engines XL
  • weight installable motors kg 600
  • CE certification with “B” design category (A+a form) .

Optional Equipment

  • Complete dingy heuling belt kit for launch/accomodation
  • Stainless steel roll-bar with sun tend for stern sunbathing area
  • Stainless steel arcs and telescopic for navigation lights and anchor lights installed of the stainless steel roll-bar
  • Sun tend with 3 stainless steel arcs when the roll-bar is not installed
  • Sliding electric stern gangway with teck grating
  • Sliding electric stern gangway with iroko grating
  • Multimedia kit: Audio Video System, Digital Terrestrial Tv, DVD-CD-MP3-Dvix, iPOD Video, LCD 17
  • Electric system
  • Navigation kit Garmin GPS MAP 5012C colour Touchscreen + Echo-Sounder

ZAR95 SL

ZAR95 SL 1
ZAR95 SL 2
ZAR95 SL 3
ZAR95 SL 4
ZAR95 SL 5
ZAR95 SL 6
ZAR95 SL 7
ZAR95 SL 8
ZAR95 SL 9
ZAR95 SL 10
ZAR95 SL 11
ZAR95 SL 12
ZAR95 SL 13
ZAR95 SL 14
ZAR95 SL 15
ZAR95 SL 16
previous arrow
next arrow

ZAR95 SL

Main Features

  • The forward area is home to a large dinette that can accommodate up to 8 people around a table, which can be transformed into a large comfortable sundeck (2.70 x 1.80 m).
  • Dual seat on front of console convertible to chaise longue.
  • Stainless steel handrail around cockpit coaming.
  • Functional and ergonomic sports console.
  • Sliding door on the side of the console providing access to an area equipped with two separate rooms: 1) marine toilet with waste tank, wash basin, shower as well as an integrated system of lockers 2) double bedroom and an integrated system of lockers.
  • Sport seats for pilot and co-pilot.
  • To the rear and below the helm station there is a kitchen with 2/3 burners and a sink covered by a nylon cutting board.
  • Under the galley unit there is a refrigerator (64 l) and a large compartment to store galley utensils. As an option there is a larger stainless steel refrigerator with two drawers (90 l).
  • Large and comfortable “C” shaped sofa at the stern that can be fitted with a table. Lowering this table provides a sundeck measuring 2.00 x 1.30 metres.
  • The engine well has two large platforms either side which can be used as bathing platforms with spaces and accessories to enjoy once moored.
  • The deep-V hull has a unique shape with a deep forefoot and a very fine entry, and it provides stability on both sides, allowing the boat to rise up on the water and remain stable, safe and comfortabile with increasing speed (these are two unique features typical of all the ZAR hulls).
  • The hull at the bow is designed to deflect the water and keep the boat dry. A feature that has made ZAR famous.
  • On the bow, an electric windlass can be installed on a special steel plate, arranged by the manufacturer.
  • As for all ZAR models, the ZAR 95 SL is available in various colours and particularly in white, black, light or dark grey and the cushions are also available in different

Optional Equipment

  • Anchor windlass installed with motor, cables, chain and dual controls (console and anchor locker)
  • Stainless steel refrigerator (90 l)
  • Front sun pad extension and convertible table including infill panels and cushions
  • Aft table with manual leg
  • Aft table with electrically adjustable leg
  • Sunbed cushions for aft table
  • Stainless steel stern gate with cushion
  • Ski pole
  • Electric panel
  • Electrically opening aft locker
  • Total night and travel cover
  • Integrated helm seat/galley and console cover
  • Flexi-teak inside the cabin
  • Flexi-teak for cockpit and bathing platform
  • Complete lifting strops kit for launch/recovery
  • Bow eye (for recovering onto trailer/mooring)

Standard Equipment

  • Anchor locker
  • Anchor roller with stainless steel plate ready for electric windlass
  • 2 wide bow storage compartments
    2 aft side small compartments
  • Wide aft central storage locker
  • 2 spacious aft storage compartments
  • Fuel tank about 600 l / 160 gal CE standard installed
  • Navigation lights fully installed (bow lights and anchor light on pole)
  • Electrical switch/fuse panel on console
  • 2 seater helm console with hydraulic steering system and sports steering wheel as well as 2 glove compartments
  • Two separate rooms: 1) marine toilet with waste tank, wash basin, shower as well as an integrated system of lockers 2) double bedroom and an integrated system of lockers
  • Electric toilet with waste tank
  • 2 LED lights inside the bedroom and 2 LED inside the toilet room
  • Dual adjustable helm/navigator seat with pivoting leaning squabs
  • Galley with 2 or 3 burners (gas installation not included)
  • Complete set of external cushions
  • Fitted backrest cushions in the bow seating area
  • Fitted backrest cushions in the aft seating area
  • Cabin cushions
  • Pressurized freshwater system with integral water tank (about 140 L/37 gal) and shower
  • Stainless steel refrigerator (64 l)
  • Gas actuator for the bow locker lid
  • Gas actuators for the 3 aft locker lid
  • Retractable bimini concealed within aft cockpit equipped with actuators for automatic opening
  • Bilge pump
  • 14 kg/30 lbs stainless steel anchor
  • Double heavy rubber bumper
  • Stainless steel handrails for all occupants
  • 4 stainless steel cleats
  • 3 stainless steel eyebolts for hangers
  • Left stern deck stainless steel folding ladder
  • Right stern deck Repair kit, inflating pump, pair of paddles

Techincal Data

Homologation CE cat “C”
Length l.o.a. m 9.60 (31’ 6“)
Beam m 3.30 (11’)
Internal walking length m 9.60 (31’ 6“)
Internal walking width m 2.50 (8’ 2”)
Intertubular width m 2.05 (6’ 9”)
Tubular diameter cm 60 (2’)
Tubular compartments n. 6
Persons capacity n. 14-16 (to be confirmed)
Net boat weight (with standard equipment, without liquids and motor) ± 10% approx. kg 2500 (5512 lbs)
Maximum applicable power kW 522 (HP 700)
Minimum applicable power (minimum performance) kW 261 (HP 350)
Recommended power (average performance) kW 373 (HP 500)
Engine shaft length 2 x XL – 1 x XXL
Max. installable motors weight kg 730 (1610 lbs)

CE certification in progress:
“C” design category and CE type testing (A+a form)

ZAR87 Welldeck

ZAR87 Welldeck 1
ZAR87 Welldeck 2
ZAR87 Welldeck 3
ZAR87 Welldeck 4
ZAR87 Welldeck 5
ZAR87 Welldeck 6
ZAR87 Welldeck 7
ZAR87 Welldeck 8
previous arrow
next arrow

ZAR87 Welldeck

Features

  • Driving consolle in VTR with anatomic 2 seater front seat,multifunctional anatomic driver’s couch for 3 seaters with 2 driving position (sitting up or down), steering gear and stainless steel handrail, hydraulic steering gear, windscreen, peak under the driver’s couch; separated toilet; predisposition for double bed with peaks; n. 3 portholes
  • 3 rows that can seat 10 persons forward running
  • front sun bathing bed convertible into a double bed (cm 190 x 230) with extensions as an optional
  • 195 x 2000 back sunbathing bed with extensions as an optional
  • kitchen area under the driver’s couch equipped with: sink, mincing board, double gas ring and refrigerator special compartment predisposition • wide stem dinette with a table as an optional
  • close cell cushions
  • padded interior sidewalls and bow
  • wide rear peak
  • wide front peak
  • back peak with the mooring accessories
  • 5 side peaks in the sides
  • 3 gas springs for afterpeak and forepeak covers
  • anchor winch nose with stainless steel bow, 9 kg. stainless steel anchor
  • 1 tank of about 550 lt complying with CE regulation
  • bilge pump
  • 7 Stainless steel handles
  • 2 stainless steel grab rods in prow
  • 4 bollards
  • perimetric double millpond
  • stainless steel ladder
  • 2 dashboards in VTR
  • 4 rubber handling handles
  • 3 stainless steel eyebolts for hangers
  • repairs kit, inflating device, a pair of paddles

Technical Data

  • Static self emptying
  • Length m 8,70
  • Width m 3,20
  • Internal walking length m 8,70
  • Internal walking width m 2,25
  • Intertubular width m 2,00
  • Tubular diameter cm 60
  • Watertight compartments n. 6
  • Seating capacity n. 12/14
  • Net dinghy weight kg 2,100 (with standard equipment, without liquids and motor) ± 10% variable datum
  • Maximum power applicable KW 442 HP600
  • Minimum power applicable (minimum performance)HP 300
  • Power recommended (average performance) HP300
  • Engine shaft lenght
  • 1 engine XXL
  • 2 engines XL
  • weight installable motors kg 600
  • CE certification with “B” design category (A+a form)

Optional Equipment

  • Stainless steel roll-bar with fibreglass bases
  • Roll-bar installation with running lights, anchorage lights, horn and wiring • Beacon ready installed on roll-bar/console
  • Prow sunbed extension
  • Stern sunbed extension
  • Total sheet for night and travelling
  • Console cover
  • Seat cover Electric panel Shower (for stern external wash basin and bathroom in console) complete with autoclave, water tank, outdoor embarkation, discharge pump and installation
  • Complete dingy heuling belt kit for launch/accommodation Anchor windlass installed with motor, cable, chain and double controls (in console and anchor housing)
  • Electrical actuator for stern peak lifting
  • Electric sea WC with installed direct discharge
  • Electric sea WC with installed black water tank
  • Full set of cabin cushions + 6 cushions in different colours
  • Wooden floor + step cover + shower for cabin and bathroom
  • Table inside the cabin
  • Chartwork light inside the cabin
  • Service light inside the cabin
  • Electric refrigerator (12/24V)
  • Two burner cooker
  • Flexi-teak for cockpit
  • Flexi-teak installation
  • External night canopy

ZAR85 SL

ZAR85 SL 1
ZAR85 SL 2
ZAR85 SL 3
ZAR85 SL 4
ZAR85 SL 5
ZAR85 SL 6
ZAR85 SL 7
ZAR85 SL 8
ZAR85 SL 9
ZAR85 SL 10
ZAR85 SL 11
ZAR85 SL 12
ZAR85 SL 13
ZAR85 SL 14
ZAR85 SL 15
previous arrow
next arrow

ZAR85 SL

Description

The new model ZAR 85 SL is the flagship of the Sport Luxury Line, which already includes the ZAR 49 SL and ZAR 59. The high performance together with a futuristic and eye-catching design of the deck, make the ZAR 85 SL trendy, ideal for lovers of style and, dare we say, glamour. The sports-oriented and ergonomic design make ZAR 85 SL perfectly suited to being a tender for a yacht, or as an independent boat.

This has been developed from the consolidated structure of the ZAR 87 which hosts an internal toilet cabin where you can comfortably stand. The same hull is perfectly adapted for the sporting concept, in line with the Sport Luxury series. This new ZAR 85 SL, has a console which can be transformed into a double bed with space underneath to fit a toilet.

Available: White gelcoat cockpit version/ Coloured gelcoat cockpit version

 

Optional Equipment

Fiberglass Hard Top – White and Light Gray, complete with 6 led spotlights, 360 ° mast head light
Fiberglass Hard Top – Medium Grey, DarkGrey, Black, complelte with 6 led spotlights, 360 ° mast
headlight
Stainless steel 5 – seat rod holder for Fiberglass Hard Top
Aft transom awning electric roller shuttler in stainless steel for Fiberglass Hard Top
Aft transom awning manual roller shuttler in aluminum and stainless steel for Fiberglass Hard Top
Stainless steel manual aft manual folding canopy for Fiberglass Hard Top
Removable awning with 2 stainless steel support poles for Fiberglass Hard Top
Anchor windlass installed with motor, cables, chain and dual controls
Infill panels and cushions for cabin bed
Addition for the stainless steel refrigerator of 90 l (in place of the standard of 64 l)
Front sun pad extension and convertible table including infill panels and cushions
Aft table with manual leg
Addition for the electic leg of the aft table
Sunbed cushions for aft table
Inox Ski pole
Auxiliary engine bracket
Electrically opening aft locker
Complete night cover
Console+helm seat+galley complete cover
Eletric toilet with direct discharge
Eletric toilet with waste tank
Flexi-teak 2G Standard inside the cabin
Flexi-teak 2G Standard for cockpit and bathing
platform
Flexi-teak 2G Easy inside the cabin
Flexi-teak 2G Easy for cockpit and bathing platform
Flexy-teak installation
Complete single point lifting strops kit for launch/recovery
Special towing bow eyes
Frontal extension for the aft bimini
Stainless Steel stern gate
Pair of canopies (dx-sx) for the arf sun-cover
Pair of canopies (dx-sx) for the arf sun-cover frontal extension

Features

Anchor locker

  • Anchor roller with stainless steel plate ready for electric windlass
  • 2 wide bow storage compartments
  • 2 bow storage lockers
  • Wide aft central storage locker
  • Integrated handrail on cockpit coaming
  • Fuel Tank about 400 l/105 gal CE standard installed
  • 2 seater helm console
  • Electrical switch/fuse panel on console
  • Navigation lights fully installed (bow lights and anchor light on pole)
  • Hydraulic steering system
  • Sports steering wheel
  • Internal storage compartment with washbasin and WC
  • 2 Led lights inside the cabin
  • Helm seat with pivoting leaning squab
  • Galley with 2 or 3 burners (gas installation not included)
  • Complete set of external cushions
  • Cabin cushions (except infills)
  • Fitted backrest cushions in the bow seating area
  • Fitted backrest cushions in the aft seating area
  • Pressurised Freshwater system with integral water tank (about 100 l/16 gal) and shower
  • Refrigerator (64 l)
  • Gas actuactor for the bow locker lid
  • Gas actuators for the aft locker lid
  • Gas actuators for the aft side locker lid
  • Retractable bimini concealed within aft cockpit locker
  • Bilge pump
  • 9 kg stainless steel anchor
  • Double heavy duty rubber fendering
  • Stainless steel grab handles for all the occupants
  • 4 stainless steel cleats
  • 3 stainless steel lifting eyes
  • Port bathing platform extension with stainless steel folding ladder
  • Starboard bathing platform
  • Repair kit
  • Inflation pump
  • Pressure gauge
  • Pair of paddles

Technical Data

Length: 8.50mt
Width: 3.20mt
Tubular diameter: 0.60mt
Watertight compartments: n.6
Seating capacity: n.12 (to be confirmed)
Net dinghy weight: 1900kg (to be confirmed)
Min.power: 250cv
Power recommended: 300/400cv
Max. power: 500cv
Engine shaft lenght: XL(2 engimes) –XXL (1 engime)
CE certification with “C” design category

ZAR79 SL

ZAR79 SL 1
ZAR79 SL 2
ZAR79 SL 3
ZAR79 SL 4
ZAR79 SL 5
ZAR79 SL 6
ZAR79 SL 7
ZAR79 SL 8
ZAR79 SL 9
ZAR79 SL 10
previous arrow
next arrow

ZAR79 SL

Description

The new ZAR 79 follows in the footsteps marked by the new Sport Luxury line. The design is inspired by the flagship ZAR 85 SL and, as with all boats by ZAR, it is built with an enormous amount of attention to the materials and fine detail.

Thanks to the proven hull, the new ZAR 79 SL combines excellent sea keeping and internal space with modern design to create a sleek and stylish craft. The high level of standard equipment, a
feature of the Sport Luxury Line, guarantees and gives value to the quality of life on board, which has always been a prerogative of ZAR.

The new ZAR 79 SL embodies 38 years of ZAR-Formenti experience and it’s the outstanding combination of solidity, quality and durability that makes it an excellent investment to give value to
your free time.

Optional Equipment

Electric windlass, installed, line and chain, double controls on console and anchor locker
Stainless steel radar arch (facing AFT)
Stainless steel radar arch (facing forward) with forward & AFT bimini
Radar arch installation with navigation lights, anchor light & horn
Radar arch wake board kit, hardware and counter plates included
Stainless steel ski pole
Floodlight, installed (on console or radar arch)
Electric marine toilet with waste tank. Installed (plus)
Kicker motor bracket
Sling kit
Tow rings
Forward board extension w/cushions and table board and leg
AFT stainless steel gate with bolster
Flexiteek 2G Standard for cabin
Flexiteek 2G Standard for deck & transom platforms
Flexiteek 2G Easy for cabin (plus)
Flexiteek 2G Easy for deck & transom platforms
Flexiteek installation
Console + seat cover
Total boat cover (for trailering)
Americana bimini top with navigation lights
Americana bimini top with navigation lights installation
Gas spring assisted bimini top
Radar arch bimini top, 1 arch
Radar arch bimini top FWD extension
Curtains (left & right) for radar arch bimini top

Features

2 Hull “ZAR custom colours” (deck only White or Light Grey)
“ZAR custom colours” tube option
ZAR custom colours” internal and external upholstery (cushions)
AFT U couch (SUITE version)
Custom console ready for porta potti or marine toilet (PLUS version)
Wider console w/front seat
Windshield
Sport driving wheel
Console handrail
Hydraulic power steering system
Storages
Double driving seat w/leaning post position
Front cushion (no plus)
AFT cushion (no plus)
AFT table cushion (to complete AFT sunpad)
AFT back rest (also used to complete the AFT sunpad)
front bolster cushions
AFT bolster cushions
Driving console front seat back rest cushion
Stainless steel cleats
Stainless steel handrails & handles
Rubber bumper
Stainless steel anchor system w/double roller and shield (ready for electric windlass)
Cabin with sink & possible toilet installation(plus)
Stove, 2 burners (gas hose and regulator non included)
Esternal sink
Electric refrigerator 12/24 VDC (liters)
Stainless steel gas tank, CE compilance installed
Navigation lights (include anchor light pole)
Electric bilge pump
Switch panel
Shower system including pump, water tank and fi ll. Installed
Lift points
Ladder
Fiberglass starboard swimming platform
Fiberglass port swimming platform w/slide-in telescopic ladder
Repair kit
Air pump
Air gauge
Paddles

Technical Data

Length: 7.90mt
Width: 2.86mt
Tubular diameter: 0.58mt
Watertight compartments: n.6
Seating capacity: 14
Net dinghy weight: 1100kg
Min.power: 130cv
Power recommended: 150/250cv
Max. power: 300cv
Engine shaft lenght: L(2 engimes) –XL (1 engime)
CE certification with “C” design category

ZAR75 Suite Plus

ZAR75 Suite Plus 1
ZAR75 Suite Plus 2
ZAR75 Suite Plus 3
ZAR75 Suite Plus 4
ZAR75 Suite Plus 5
ZAR75 Suite Plus 7
ZAR75 Suite Plus 6
previous arrow
next arrow

ZAR75 Suite Plus

Features

  • 3 rows that can seat 10 persons forward running;
  • anchor forepeaks and afterpeaks;
  • back peak with the mooring accessories;
  • front sun bathing bed convertible into a double bed (cm 160 x 230) with extensions as an optional;
  • wide stem dinette with a table as an optional;
  • wide back dinette with a table included (Suite);
  • 175 x 180 back sunbathing bed (with the two back rests in the horizontal position);
  • two-seater console (that can be located in the middle or on the side of the boat) with a hydraulic wheelhouse, stainless steel rudder, 2 internal watertight compartments with door, an object holder and two peaks under the front seat, wc -as an optional;
  • three-seater multifunctional anatomic driver’s couch with double driving position (sitting up and down);
  • kitchen area under the driver’s couch equipped with:sink, mincing board (also utilizable like a place for a mono/double gas ring) and refrigerator special compartment predisposition;
  • bilge pump;
  • 8 stainless steel handles for passengers safety;
  • foldaway stainless steel ascent ramp and double VTR bridge;
  • 2 stainless steel fuel tanks (about 200+200 litres for Zar 75 and Zar 75 Suite) located under the walk floor according to standards;
  • 1 stainless steel fuel tank (about 200 for Zar 75 Plus and Zar 75 Suite Plus) located under the walk floor according to standards;
  • 6 handling handles;
  • 4 stainless steel bollards;
  • perimetric double millpond;
  • polished stainless steel 9 Kg anchor;
  • anchor-winch nose with stainless steel bow;
  • 3 stainless steel eyebolts for hangers.

Optional Equipment

  • Stainless steel roll-bar with fibreglass bases
  • Roll-bar installation with running lights,anchorage lights, horn and wiring
  • Beacon ready installed on roll-bar/console
  • Prow sunbed extension each (not for Plus version)
  • Prow complete table
  • Auxiliary engine support
  • Total sheet for night and travelling
  • Console cover
  • Seat cover
  • Eletric panel
  • Shower Complete (for stern and external wash basin) with surge tank, tank in prow, outdoor embarkation and installation
  • Complete dingy heuling belt kit for launch/accommodation
  • Anchor windlass installed with motor, cable, chain and double controls (in console and anchor housing)
  • Wake board kit complete with counterplates
  • Left stern deck with folding ladder (single and double engine)
  • Right stern deck (single and double engine)
  • Modification kit from Zar 75 to Zar 75 suite
  • Modification kit installation from Zar 75 to Zar 75 suite
  • Console change kit from ZAR 75 to ZAR 75 plus
  • Installation console change
  • Eletric refrigerator (12/24V)
  • Flexi-teak for cockpit
  • Felxi teak for the bridges + covers (4pz)
  • Felxi teak for the bridges (2pz)
  • Flexi-teak installation
  • Nautical camping tent
  • Sunroof 3 arch
  • Rear telescopic sun-cover for roll-bar
  • Prow sunroof (rear telescopic sun-coverextension)
  • Pair of canopies (dx-sx) for telescopic sun-cover
  • Pair of canopies (dx-sx) for prow sun-bathing bed extension

Technical Data

  • Static self emptying
  • Homologation “CE cat. “B”
  • Length m 7.42
  • Width m 2.82
  • Internal walking length m 7.35
  • Internal walking width m 2.20
  • Intertubular width m 1.68
  • Tubular diameter cm 58
  • tubular compartments n. 6
  • Seating capacity n. 14
  • Net dinghy weight kg 1,100
  • (with standard equipment, without
  • liquids and motor) ± 10% variable datum
  • Maximum power applicable kW 225 / HP 300
  • Minimum power applicable(minimum performance) HP 130
  • Power recommended (average performance) HP 150/250
  • Engine shaft lenght XL
  • weight nstallable motors kg 480
  • CE certification with “B” design category and CE type testing. (A+a form).

Further Accessories Only For Plus Version

  • Electric sea WC with installed direct discharge
  • Electric sea WC with installed black water tank
  • Console cover
  • Shower (for stern external wash basin and bathroom in console) complete with autoclave, tank in prow, outdoor embarkation, discharge pump and installation
  • Prow sunbed extension each (for Plus version)
  • Installation supplementary water tank of about 67 litres
  • Supplementary 80 lt fuel tank in the bow
  • Supplementary 80 lt fuel tank installation
  • 8 plug electrical panel

ZAR75 Suite

ZAR75 Suite 1
ZAR75 Suite 2
ZAR75 Suite 3
ZAR75 Suite 4
ZAR75 Suite 5
ZAR75 Suite 6
previous arrow
next arrow

ZAR75 Suite

Features

  • 3 rows that can seat 10 persons forward running;
  • anchor forepeaks and afterpeaks;
  • back peak with the mooring accessories;
  • front sun bathing bed convertible into a double bed (cm 160 x 230) with extensions as an optional;
  • wide stem dinette with a table as an optional;
  • wide back dinette with a table included (Suite);
  • 175 x 180 back sunbathing bed (with the two back rests in the horizontal position);
  • two-seater console (that can be located in the middle or on the side of the boat) with a hydraulic wheelhouse, stainless steel rudder, 2 internal watertight compartments with door, an object holder and two peaks under the front seat, wc -as an optional;
  • three-seater multifunctional anatomic driver’s couch with double driving position (sitting up and down);
  • kitchen area under the driver’s couch equipped with:sink, mincing board (also utilizable like a place for a mono/double gas ring) and refrigerator special compartment predisposition;
  • bilge pump;
  • 8 stainless steel handles for passengers safety;
  • foldaway stainless steel ascent ramp and double VTR bridge;
  • 2 stainless steel fuel tanks (about 200+200 litres for Zar 75 and Zar 75 Suite) located under the walk floor according to standards;
  • 1 stainless steel fuel tank (about 200 for Zar 75 Plus and Zar 75 Suite Plus) located under the walk floor according to standards;
  • 6 handling handles;
  • 4 stainless steel bollards;
  • perimetric double millpond;
  • polished stainless steel 9 Kg anchor;
  • anchor-winch nose with stainless steel bow;
  • 3 stainless steel eyebolts for hangers.

Optional Equipment

  • Stainless steel roll-bar with fibreglass bases
  • Roll-bar installation with running lights,anchorage lights, horn and wiring
  • Beacon ready installed on roll-bar/console
  • Prow sunbed extension each (not for Plus version)
  • Prow complete table
  • Auxiliary engine support
  • Total sheet for night and travelling
  • Console cover
  • Seat cover
  • Eletric panel
  • Shower Complete (for stern and external wash basin) with surge tank, tank in prow, outdoor embarkation and installation
  • Complete dingy heuling belt kit for launch/accommodation
  • Anchor windlass installed with motor, cable, chain and double controls (in console and anchor housing)
  • Wake board kit complete with counterplates
  • Left stern deck with folding ladder (single and double engine)
  • Right stern deck (single and double engine)
  • Modification kit from Zar 75 to Zar 75 suite
  • Modification kit installation from Zar 75 to Zar 75 suite
  • Console change kit from ZAR 75 to ZAR 75 plus
  • Installation console change
  • Eletric refrigerator (12/24V)
  • Flexi-teak for cockpit
  • Felxi teak for the bridges + covers (4pz)
  • Felxi teak for the bridges (2pz)
  • Flexi-teak installation
  • Nautical camping tent
  • Sunroof 3 arch
  • Rear telescopic sun-cover for roll-bar
  • Prow sunroof (rear telescopic sun-coverextension)
  • Pair of canopies (dx-sx) for telescopic sun-cover
  • Pair of canopies (dx-sx) for prow sun-bathing bed extension

Technical Data

  • Static self emptying
  • Homologation “CE cat. “B”
  • Length m 7.42
  • Width m 2.82
  • Internal walking length m 7.35
  • Internal walking width m 2.20
  • Intertubular width m 1.68
  • Tubular diameter cm 58
  • tubular compartments n. 6
  • Seating capacity n. 14
  • Net dinghy weight kg 1,100
  • (with standard equipment, without
  • liquids and motor) ± 10% variable datum
  • Maximum power applicable kW 225 / HP 300
  • Minimum power applicable(minimum performance) HP 130
  • Power recommended (average performance) HP 150/250
  • Engine shaft length XL
  • weight Installable motors kg 480
  • CE certification with “B” design category and CE type testing. (A+a form).

Further Accessories Only For Plus Version

  • Electric sea WC with installed direct discharge
  • Electric sea WC with installed black water tank
  • Console cover
  • Shower (for stern external wash basin and bathroom in console) complete with autoclave, tank in prow, outdoor embarkation, discharge pump and installation
  • Prow sunbed extension each (for Plus version)
  • Installation supplementary water tank of about 67 litres
  • Supplementary 80 lt fuel tank in the bow
  • Supplementary 80 lt fuel tank installation
  • 8 plug electrical panel

ZAR75 Plus

slide 1
Img
Img
Img
previous arrow
next arrow

ZAR75 Plus

Features

  • 3 rows that can seat 10 persons forward running
  • anchor forepeaks and afterpeaks
  • back peak with the mooring accessories
  • front sun bathing bed convertible into a double bed (cm 160 x 230) with extensions as an optional
  • wide stem dinette with a table as an optional
  • wide back dinette with a table included (Suite)
  • 175 x 180 back sunbathing bed (with the two back rests in the horizontal position)
  • two-seater console (that can be located in the middle or on the side of the boat) with a hydraulic wheelhouse, stainless steel rudder, 2 internal watertight compartments with door, an object holder and two peaks under the front seat, wc -as an optional;three-seater multifunctional anatomic driver’s couch with double driving position (sitting up and down)
  • kitchen area under the driver’s couch equipped with:sink, mincing board (also utilizable like a place for a mono/double gas ring) and refrigerator special compartment predisposition
  • bilge pump
  • 8 stainless steel handles for passengers safety
  • foldaway stainless steel ascent ramp and double VTR bridge
  • 2 stainless steel fuel tanks (about 200+200 litres for Zar 75 and Zar 75 Suite) located under the walk floor according to standards
  • 1 stainless steel fuel tank (about 200 for Zar 75 Plus and Zar 75 Suite Plus) located under the walk floor according to standards
  • 6 handling handles
  • 4 stainless steel bollards;perimetric double millpond
  • polished stainless steel 9 Kg anchor
  • anchor-winch nose with stainless steel bow
  • 3 stainless steel eyebolts for hangers

Optional Equipment

  • Stainless steel roll-bar with fibreglass bases
  • Roll-bar installation with running lights,anchorage lights, horn and wiring
  • Beacon ready installed on roll-bar/console
  • Prow sunbed extension each (not for Plus version)
  • Prow complete table
  • Auxiliary engine support
  • Total sheet for night and travelling
  • Console cover
  • Seat cover
  • Electric panel
  • Shower Complete (for stern and external wash basin) with surge tank, tank in prow, outdoor embarkation and installation
  • Complete dingy heuling belt kit for launch/accommodation
  • Anchor windlass installed with motor, cable, chain and double controls (in console and anchor housing)Wake board kit complete with counterplates
  • Left stern deck with folding ladder (single and double engine)
  • Right stern deck (single and double engine)
  • Modification kit from Zar 75 to Zar 75 suite
  • Modification kit installation from Zar 75 to Zar 75 suite
  • Console change kit from ZAR 75 to ZAR 75 plus
  • Installation console change
  • Electric refrigerator (12/24V)
  • Flexi-teak for cockpit
  • Flexi teak for the bridges + covers (4pz)
  • Flexi teak for the bridges (2pz)
  • Flexi-teak installation
  • Nautical camping tent
  • Sunroof 3 arch
  • Rear telescopic sun-cover for roll-bar
  • Prow sunroof (rear telescopic sun-cover extension)
  • Pair of canopies (dx-sx) for telescopic sun-cover
  • Pair of canopies (dx-sx) for prow sun-bathing bed extension

Technical Data

  • Static self emptying
  • Homologation “CE cat. “B”
  • Length m 7.42
  • Width m 2.82
  • Internal walking length m 7.35
  • Internal walking width m 2.20
  • Intertubular width m 1.68
  • Tubular diameter cm 58
  • tubular compartments n. 6
  • Seating capacity n. 14
  • Net dinghy weight kg 1,100(with standard equipment, without liquids and motor) ± 10% variable datum
  • Maximum power applicable kW 225 / HP 300
  • Minimum power applicable (minimum performance) HP 130
  • Power recommended (average performance) HP 150/250
  • Engine shaft length XL
  • weight installable motors kg 480
  • CE certification with “B” design category and CE type testing. (A+a form).

Further Accessories Only For Plus Version

  • Electric sea WC with installed direct discharge
  • Electric sea WC with installed black water tank
  • Console cover
  • Shower (for stern external wash basin and bathroom in console) complete with autoclave, tank in prow, outdoor embarkation, discharge pump and installation
  • Prow sunbed extension each (for Plus version)
  • Installation supplementary water tank of about 67 litres
  • Supplementary 80 lt fuel tank in the bow
  • Supplementary 80 lt fuel tank installation
  • 8 plug electrical panel

ZAR75

ZAR75

Features

  • 3 rows that can seat 10 persons forward running;
  • anchor forepeaks and afterpeaks;
  • back peak with the mooring accessories;
  • front sun bathing bed convertible into a double bed (cm 160 x 230) with extensions as an optional;
  • wide stem dinette with a table as an optional;
  • wide back dinette with a table included (Suite);
  • 175 x 180 back sunbathing bed (with the two back rests in the horizontal position);
  • two-seater console (that can be located in the middle or on the side of the boat) with a hydraulic wheelhouse, stainless steel rudder, 2 internal watertight compartments with door, an object holder and two peaks under the front seat, wc -as an optional;
  • three-seater multifunctional anatomic driver’s couch with double driving position (sitting up and down);
  • kitchen area under the driver’s couch equipped with:sink, mincing board (also utilizable like a place for a mono/double gas ring) and refrigerator special compartment predisposition;
  • bilge pump;
  • 8 stainless steel handles for passengers safety;
  • foldaway stainless steel ascent ramp and double VTR bridge;
  • 2 stainless steel fuel tanks (about 200+200 litres for Zar 75 and Zar 75 Suite) located under the walk floor according to standards;
  • 1 stainless steel fuel tank (about 200 for Zar 75 Plus and Zar 75 Suite Plus) located under the walk floor according to standards;
  • 6 handling handles;
  • 4 stainless steel bollards;
  • perimetric double millpond;
  • polished stainless steel 9 Kg anchor;
  • anchor-winch nose with stainless steel bow;
  • 3 stainless steel eyebolts for hangers.

Optional Equipment

  • Stainless steel roll-bar with fibreglass bases
  • Roll-bar installation with running lights,anchorage lights, horn and wiring
  • Beacon ready installed on roll-bar/console
  • Prow sunbed extension each (not for Plus version)
  • Prow complete table
  • Auxiliary engine support
  • Total sheet for night and travelling
  • Console cover
  • Seat cover
  • Electric panel
  • Shower Complete (for stern and external wash basin) with surge tank, tank in prow, outdoor embarkation and installation
  • Complete dingy heuling belt kit for launch/accommodation
  • Anchor windlass installed with motor, cable, chain and double controls (in console and anchor housing)
  • Wake board kit complete with counterplates
  • Left stern deck with folding ladder (single and double engine)
  • Right stern deck (single and double engine)
  • Modification kit from Zar 75 to Zar 75 suite
  • Modification kit installation from Zar 75 to Zar 75 suite
  • Console change kit from ZAR 75 to ZAR 75 plus
  • Installation console change
  • Eletric refrigerator (12/24V)
  • Flexi-teak for cockpit
  • Flexi teak for the bridges + covers (4pz)
  • Flexi teak for the bridges (2pz)
  • Flexi-teak installation
  • Nautical camping tent
  • Sunroof 3 arch
  • Rear telescopic sun-cover for roll-bar
  • Prow sunroof (rear telescopic sun-coverextension)
  • Pair of canopies (dx-sx) for telescopic sun-cover
  • Pair of canopies (dx-sx) for prow sun-bathing bed extension

Technical Data

  • Static self emptying
  • Homologation “CE cat. “B”
  • Length m 7.42
  • Width m 2.82
  • Internal walking length m 7.35
  • Internal walking width m 2.20
  • Intertubular width m 1.68
  • Tubular diameter cm 58
  • tubular compartments n. 6
  • Seating capacity n. 14
  • Net dinghy weight kg 1,100
  • (with standard equipment, withoutliquids and motor) ± 10% variable datum
  • Maximum power applicable kW 225 / HP 300
  • Minimum power applicable(minimum performance) HP 130
  • Power recommended (average performance) HP 150/250
  • Engine shaft length XL
  • weight installable motors kg 480
  • CE certification with “B” design category and CE type testing. (A+a form).

Further Accessories Only For Plus Version

  • Electric sea WC with installed direct discharge
  • Electric sea WC with installed black water tank
  • Console cover
  • Shower (for stern external wash basin and bathroom in console) complete with autoclave, tank in prow, outdoor embarkation, discharge pump and installation
  • Prow sunbed extension each (for Plus version)
  • Installation supplementary water tank of about 67 litres
  • Supplementary 80 lt fuel tank in the bow
  • Supplementary 80 lt fuel tank installation
  • 8 plug electrical panel