ZAR65 Suite Plus

ZAR65 Suite Plus
ZAR65 Suite Plus

ZAR65 Suite Plus
ZAR65 Suite Plus

ZAR65 Suite Plus
ZAR65 Suite Plus




  • 3 rows that can seat 8 persons forward running;

  • anchor forepeaks and afterpeaks;

  • back peak with the mooring accessories;

  • front sun bathing bed convertible into a double bed (cm 150 x 195) with extension as an optional;

  • wide stem dinette with a table as an optional;

  • wide back peak;

  • wide front peak;

  • wide back dinette with a table included (only Suite version);

  • two side peaks in the stem sides;

  • 160 x 190 back sunbathing bed (with the back rest in the horizontal position);

  • two-seater console with a hydraulic wheelhouse, stainless steel rudder, 1 internal compartment with door, an object holder and four peaks under the driver’s couch and under the front seat. Reclining driver’s couch;

  • bilge pump;

  • repairs kit;

  • inflating device;

  • a pair of paddles;

  • 8 stainless steel handles for passengers safety;

  • foldaway stainless steel ascent ramp and double VTR bridge;

  • 1 reticular polypropylene fuel tank (about 240 litres) according to standards CE;

  • 6 handling handles;

  • 4 stainless steel bollards;

  • perimetric double millpond;

  • polished stainless steel 9 Kg anchor;

  • anchor-winch nose with stainless steel bow;

  • 3 stainless steel eyebolts for hangers.

  • Dinette with a U-divan and special console with sea/chemical WC and shower fitting

Technical Data


  • Static self emptying

  • Homologation "CE cat. "B"

  • Length m 6,50

  • Width m 2,55

  • Internal walking length m 6,40

  • Internal walking width m 2,00

  • Intertubular width m 1,50

  • Tubular diameter cm 53

  • Watertight compartments n. 6

  • Seating capacity n. 12

  • Net dinghy weight (without equipment, liquids or motor) ± 10% variable datum kg 880

  • Maximum power applicable kW 166/HP 225

  • Minimum power applicable (minimum performance) HP 85/CV115

  • Power recommended (average performance) HP 140/180

  • Engine shaft lenght L

  • on demand XL

  • Max. weight installable motors kg 400

  • CE certification with “B” design category and CE type testing. (A+a form).


Optional Equipment


  • Stainless steel roll-bar

  • Roll-bar installation with running lights, anchorage lights, horn and wiring

  • Beacon ready installed on roll-bar/console

  • Sunbed extension

  • Prow complete table

  • Auxiliary engine support

  • Total night cover

  • Partial night cover

  • Console cover

  • Seat cover

  • Eletric panel

  • Left stern deck with folding ladder

  • Right stern deck

  • Shower Complete with surge tank, tank in prow, outdoor embarkation and installation

  • Complete dingy heuling belt kit for launch/accommodation

  • Anchor windlass installed with motor, cable, chain and double controls (in console and anchor housing)

  • Wake board kit complete

  • with counterplates

  • Modification kit from Zar 65 to Zar 65 suite

  • Modification kit installation from Zar 65 to Zar 65 suite

  • Dashboard with ladder for double engine installation

  • Eletric refrigerator (12/24V)

  • Modification of the ZAR 65 driver’s seat (for boats manufactured before September 2005)

  • Flexi-teak for cockpit

  • Felxi teak for the bridges + covers (4pz)

  • Felxi teak for the bridges (2pz)

  • Flexi-teak installation

  • Nautical camping tent

  • Sunroof 3 arch

  • Rear telescopic sun-cover for roll-bar

  • Prow sunroof (rear telescopic sun-cover extension)

  • Side canopy(1) for telescopic sun-cover